The main limitation of acoustic particle separation for microfluidic application is its low sorting efficiency. This is due to the weak coupling of surface acoustic waves (SAWs) into the microchannel. In this work, we demonstrate bulk acoustic wave (BAW) particle sorting using capacitive micromachined ultrasonic transducers (CMUTs) for the first time. A collapsed mode CMUT was driven in air to generate acoustic pressure within the silicon substrate in the in-plane direction of the silicon die. This acoustic pressure was coupled into a water droplet, positioned at the side of the CMUT die, and measured with an optical hydrophone. By using a beam steering approach, the ultrasound generated from 32 CMUT elements were added in-phase to generate a maximum peak-to-peak pressure of 0.9 MPa. Using this pressure, 10 µm latex beads were sorted almost instantaneously.

The achievable bandwidth in ladder acoustic filters is strictly limited by the electromechanical coupling coefficient (k;) in conventional ladder-acoustic filters. Furthermore, their out-of-band rejection is inherently weak due to the frequency responses of the shunt or series-connected acoustic resonators. This work proposes a coupling-matrix-based solution for both issues by employing acoustic and electromagnetic resonators within the same filter prototype using prescribed Chebyshev responses. It has been shown that significantly much wider bandwidths, that cannot be achieved with acoustic-only filters, can be obtained. An important strength of the proposed method is that a filter with a particular FBW can be designed with a wide range of acoustic resonators with different k; values. An 14 % third-order asymmetrical-response filter is designed and fabricated using electromagnetic resonators and an acoustic resonator with a k; of 3.5 %.

Expanding techniques for chip-scale acoustic wave focusing would open doors for advancements in signal processing and quantum electromechanical microsystems. In this paper, we present a method for acoustic wave focusing and wavefront shaping at radio frequencies (RF), validated with thin-film lithium niobite on a low-loss and high coupling silicon carbide (LiNbO3-on-SiC) testbed. By depositing a metal layer, we can mitigate the piezoelectric stiffening effect, and reduce the acoustic wave speed in a patterned area. Employing a design analogous to geometric optical systems, efficient acoustic wave focusing is experimentally observed. With more development, this technique could be employed in emerging acoustic microsystems.

Solidly mounted resonators (SMRs) built on dielectric acoustic reflectors can save several fabrication steps as well as avoid undesired parasitic effects when exciting extended electrodes via capacitive coupling. In this work we manufacture and measure the frequency response of AlN-based SMRs built on 7-layer ZnO/SiO2 acoustic reflectors with SiO2 working as low impedance material and ZnO as high impedance material. After applying a 700°C treatment, their frequency response is measured again and compared with the pre-treatment measurements.

Recently, in solving problems of sound radiation by systems of piezoceramic radiators, new approaches have emerged, which make it possible to significantly approximate the design parameters of systems to the actually measured ones. These approaches are associated with taking into account the specific features of these systems performing two functions - the function of converting electrical energy into acoustic energy and the function of forming the latter in the surrounding space. The peculiarity of the first function is the interconnection of the electric, mechanical and acoustic fields during energy conversion. The peculiarity of the second function is the interaction of the radiators in the system during the formation of its acoustic field. The aim of the work is to study the effect of acoustic interaction of cylindrical piezoceramic radiators in the composition of flat systems on their physical fields. Using the method of coupled fields in multiply connected domains, using the addition theorems for cylindrical wave functions, we obtain analytical relations that allow one to calculate the numerical results for the parameters of three interconnected physical fields that ensure the emission of sound by plane systems. Their analysis showed that with the radial symmetry of electrical excitation of cylindrical radiators, the conversion of electrical energy into mechanical energy is carried out on one - zero mode of oscillation. The placement of the radiators in the composition of the flat systems leads to the appearance of the effect of acoustic interaction between them in an external field, due to the multiple exchange of radiated and scattered waves. This effect destroys the radial symmetry of the acoustic loading of a single radiator. The violation of symmetry in the conversion of mechanical energy into acoustic energy leads to the appearance of oscillations that follow the zero mode. As a result, there is an effective redistribution of energy “pumped” into the radiators in the zero mode, between subsequent oscillations of the radiators. In turn, the emergence of new modes changes the acoustic field of a flat system. The results show the need to take into account the above features of the physical fields of the radiators in the composition of flat systems when choosing methods and developing methods for measuring field characteristics.

From the perspective of time domain, the propagation characteristics of sound waves in seawater can be seen more intuitively. In order to study the influence and characteristics of seamount on low frequency acoustic propagation, the research of this paper used the Finite Element Method (FEM) based on time domain to set up a full-waveguide low-frequency acoustic propagation simulation model, and discussed the influencing laws about acoustic propagation on seamount. The simulation results show that Seamounts can hinder the propagation of sound waves, weaken the energy of sound waves. The topographic changes of seamounts can cause the coupling and transformation of acoustic signals during the propagation which can stimulate the seabed interface wave.

Edge computing is a prospective notion for expanding the potential of cloud computing. It is vital to maintaining a decent atmosphere free of all forms of security and breaches in order to continue utilizing computer services. The security concerns surrounding the edge computing environment has been impeded as a result of the security issues that surround the area. Many researchers have looked into edge computing security issues, however, not all have thoroughly studied the needs. Security requirements are the goals that specify the capabilities and operations that a process that is carried out by a system in order to eliminate various security flaws. The purpose of this study is to give a complete overview of the many different artificial intelligence technologies that are now being utilized for edge computing security with the intention of aiding research in the future in locating research potential. This article analyzed the most recent research and shed light on the following topics: state-of-the-art techniques used to combat security threats, technological trends used by the method, metrics utilize to assess the techniques' ability, and opportunities of research for future researchers in the area of artificial intelligence for edge computing security.

In today's society, with the continuous development of artificial intelligence, artificial intelligence technology plays an increasingly important role in social and economic development, and hass become the fastest growing, most widely used and most influential high-tech in the world today one. However, at the same time, information technology has also brought threats to network security to the entire network world, which makes information systems also face huge and severe challenges, which will affect the stability and development of society to a certain extent. Therefore, comprehensive analysis and research on information system security is a very necessary and urgent task. Through the security assessment of the information system, we can discover the key hidden dangers and loopholes that are hidden in the information source or potentially threaten user data and confidential files, so as to effectively prevent these risks from occurring and provide effective solutions; at the same time To a certain extent, prevent virus invasion, malicious program attacks and network hackers' intrusive behaviors. This article adopts the experimental analysis method to explore how to apply the most practical, advanced and efficient artificial intelligence theory to the information system security assessment management, so as to further realize the optimal design of the information system security assessment management system, which will protect our country the information security has very important meaning and practical value. According to the research results, the function of the experimental test system is complete and available, and the security is good, which can meet the requirements of multi-user operation for security evaluation of the information system.

Cyberspace is the fifth largest activity space after land, sea, air and space. Safeguarding Cyberspace Security is a major issue related to national security, national sovereignty and the legitimate rights and interests of the people. With the rapid development of artificial intelligence technology and its application in various fields, cyberspace security is facing new challenges. How to help the network security personnel grasp the security trend at any time, help the network security monitoring personnel respond to the alarm information quickly, and facilitate the tracking and processing of the monitoring personnel. This paper introduces a method of using situational awareness micro application actual combat attack and defense robot to quickly feed back the network attack information to the monitoring personnel, timely report the attack information to the information reporting platform and automatically block the malicious IP.

The model called CSAI-4-CPS is proposed to characterize the use of Artificial Intelligence in Cybersecurity applied to the context of CPS - Cyber-Physical Systems. The model aims to establish a methodology being able to self-adapt using shared machine learning models, without incurring the loss of data privacy. The model will be implemented in a generic framework, to assess accuracy across different datasets, taking advantage of the federated learning and machine learning approach. The proposed solution can facilitate the construction of new AI cybersecurity tools and systems for CPS, enabling a better assessment and increasing the level of security/robustness of these systems more efficiently.

In recent years, the detection of illegal and harmful messages which plays an significant role in Internet service is highly valued by the government and society. Although artificial intelligence technology is increasingly applied to actual operating systems, it is still a big challenge to be applied to systems that require high real-time performance. This paper provides a real-time detection system solution based on artificial intelligence technology. We first introduce the background of real-time detection of illegal and harmful messages. Second, we propose a complete set of intelligent detection system schemes for real-time detection, and conduct technical exploration and innovation in the media classification process including detection model optimization, traffic monitoring and automatic configuration algorithm. Finally, we carry out corresponding performance verification.

Artificial intelligence is a subfield of computer science that refers to the intelligence displayed by machines or software. The research has influenced the rapid development of smart devices that have a significant impact on our daily lives. Science, engineering, business, and medicine have all improved their prediction powers in order to make our lives easier in our daily tasks. The quality and efficiency of regions that use artificial intelligence has improved, as shown in this study. It successfully handles data organisation and environment difficulties, allowing for the development of a more solid and rigorous model. The pace of life is quickening in the digital age, and the PC Internet falls well short of meeting people’s needs. Users want to be able to get convenient network information services at any time and from any location

Several excellent devices can communicate without the need for human intervention. It is one of the fastest-growing sectors in the history of computing, with an estimated 50 billion devices sold by the end of 2020. On the one hand, IoT developments play a crucial role in upgrading a few simple, intelligent applications that can increase living quality. On the other hand, the security concerns have been noted to the cross-cutting idea of frameworks and the multidisciplinary components connected with their organization. As a result, encryption, validation, access control, network security, and application security initiatives for gadgets and their inherent flaws cannot be implemented. It should upgrade existing security measures to ensure that the ML environment is sufficiently protected. Machine learning (ML) has advanced tremendously in the last few years. Machine insight has evolved from a research center curiosity to a sensible instrument in a few critical applications.

The development of industrial robots, as a carrier of artificial intelligence, has played an important role in promoting the popularisation of artificial intelligence super automation technology. The paper introduces the system structure, hardware structure, and software system of the mobile robot climber based on computer big data technology, based on this research background. At the same time, the paper focuses on the climber robot's mechanism compound method and obstacle avoidance control algorithm. Smart home computing focuses on “home” and brings together related peripheral industries to promote smart home services such as smart appliances, home entertainment, home health care, and security monitoring in order to create a safe, secure, energy-efficient, sustainable, and comfortable residential living environment. It's been twenty years. There is still no clear definition of “intelligence at home,” according to Philips Inc., a leading consumer electronics manufacturer, which once stated that intelligence should comprise sensing, connectedness, learning, adaption, and ease of interaction. S mart applications and services are still in the early stages of development, and not all of them can yet exhibit these five intelligent traits.

Transformer is the key equipment of power system, and its stable operation is very important to the security of power system In practical application, with the progress of technology, the performance of transformer becomes more and more important, but faults also occur from time to time in practical application, and the traditional manual fault diagnosis needs to consume a lot of time and energy. At present, the rapid development of artificial intelligence technology provides a new research direction for timely and accurate detection and treatment of transformer faults. In this paper, a method of transformer fault diagnosis using artificial neural network is proposed. The neural network algorithm is used for off-line learning and training of the operation state data of normal and fault states. By adjusting the relationship between neuron nodes, the mapping relationship between fault characteristics and fault location is established by using network layer learning, Finally, the reasoning process from fault feature to fault location is realized to realize intelligent fault diagnosis.

Intelligent transportation systems, such as connected vehicles, are able to establish real-time, optimized and collision-free communication with the surrounding ecosystem. Introducing the internet of things (IoT) in connected vehicles relies on deployment of massive scale sensors, actuators, electronic control units (ECUs) and antennas with embedded software and communication technologies. Combined with the lack of designed-in security for sensors and ECUs, this creates challenges for security engineers and architects to identify, understand and analyze threats so that actions can be taken to protect the system assets. This paper proposes a novel STRIDE-based threat model for IoT sensors in connected vehicle networks aimed at addressing these challenges. Using a reference architecture of a connected vehicle, we identify system assets in connected vehicle sub-systems such as devices and peripherals that mostly involve sensors. Moreover, we provide a prioritized set of security recommendations, with consideration to the feasibility and deployment challenges, which enables practical applicability of the developed threat model to help specify security requirements to protect critical assets within the sensor network.

Security is an essential requirement of Industrial Control System (ICS) environments and its underlying communication infrastructure. Especially the lowest communication level within Supervisory Control and Data Acquisition (SCADA) systems - the field level - commonly lacks security measures.Since emerging wireless technologies within field level expose the lowest communication infrastructure towards potential attackers, additional security measures above the prevalent concept of air-gapped communication must be considered.Therefore, this work analyzes security aspects for the wireless communication protocol IO-Link Wireless (IOLW), which is commonly used for sensor and actuator field level communication. A possible architecture for an IOLW safety layer has already been presented recently [1].In this paper, the overall attack surface of IOLW within its typical environment is analyzed and attack preconditions are investigated to assess the effectiveness of different security measures. Additionally, enhanced security measures are evaluated for the communication systems and the results are summarized. Also, interference of security measures and functional safety principles within the communication are investigated, which do not necessarily complement one another but may also have contradictory requirements.This work is intended to discuss and propose enhancements of the IOLW standard with additional security considerations in future implementations.

In this paper, we investigate the conditions for the existence of dynamically undetectable attacks and perfectly undetectable attacks. Then we provide a quantitative measure on the security for discrete-time linear time-invariant (LTI) systems under both actuator and sensor attacks based on undetectability. Finally, the computation of proposed security index is reduced to a min-cut problem for the structured systems by graph theory. Numerical examples are provided to illustrate the theoretical results.

This publication deals with the robust attitude stabilization of a quadrotor subject to stealthy actuator attacks. Based first on the nonlinear model of the system, the sector non-linearity approach will be applied in order to deduce a polytopic Takagi-sugeno model. In parallel, a polytopic fuzzy T-S modeling of the data-deception malicious attacks (time-varying parameters) is presented. After some mathematical development, it will be shown that our original nonlinear system subject to stealthy actuator attacks can be represented as an uncertain polytopic T-S system. Based on this latest model, basic concepts for attitude stabilization will be used to implement the control law. The stabilization conditions will be given in terms of Linear Matrix Inequalities (LMIs) deduced from a classical Lyapunov approach. In order to highlight the efficiency of the proposed approach, simulation results will be given.

This study addresses the coordination issue of multi-agent systems under complicated actuator faults and cyber attacks. Distributed fault-tolerant design is developed with the estimated and output neighboring information in decentralized estimation observer. Criteria of reaching the exponential coordination of multi-agent systems with cyber attacks is obtained with average dwelling time and chattering bound method. Simulations validate the efficiency of the anti-attack fault-tolerant design.

The emergence of CPSs leads to modernization of critical infrastructures and improving flexibility and efficiency from one point of view. However, from another point of view, this modernization has subjected them to cyber threats. This paper provides a modeling approach for evaluating the security of CPSs. The main idea behind the presented model is to study the attacker and the system behaviors in the penetration and attack phases with exploiting some defensive countermeasures such as redundant components and attack detection strategies. By using the proposed approach, we can investigate how redundancy factor of sensors, controllers and actuators and intrusion detection systems can improve the system security and delay the system security failure.

This demonstration presents an internet of things device (thermostat), whose security is enforced by a secure element (smartcard) running TLS server, and using Virtual Input/Ouput technology. The board comprises a Wi-Fi system on chip (SoC), a micro-controller managing sensor (temperature probe) and actuator (relay), and a javacard. All device messages are sent/received over TLS, and processed by the secure element. Some of them are exported to micro-controller in clear form, which returns a response, sent over TLS by the smartcard.

Machine learning (ML) has been applied in prognostics and health management (PHM) to monitor and predict the health of industrial machinery. The use of PHM in production systems creates a cyber-physical, omni-layer system. While ML offers statistical improvements over previous methods, and brings statistical models to bear on new systems and PHM tasks, it is susceptible to performance degradation when the behavior of the systems that ML is receiving its inputs from changes. Natural changes such as physical wear and engineered changes such as maintenance and rebuild procedures are catalysts for performance degradation, and are both inherent to production systems. Drawing from data on the impact of maintenance procedures on ML performance in hydraulic actuators, this paper presents a simulation study that investigates how long it takes for ML performance degradation to create a difference in the throughput of serial production system. In particular, this investigation considers the performance of an ML model learned on data collected before a rebuild procedure is conducted on a hydraulic actuator and an ML model transfer learned on data collected after the rebuild procedure. Transfer learning is able to mitigate performance degradation, but there is still a significant impact on throughput. The conclusion is drawn that ML faults can have drastic, non-linear effects on the throughput of production systems.

In control systems, the operation of the system after an incident occurs is important. This paper proposes to design a whitelist model that can detect anomalies and identify locations of anomalous actuators using finite automata during multiple actuators attack. By applying this model and comparing the whitelist model with the operation data, the monitoring system detects anomalies and identifies anomaly locations of actuator that deviate from normal operation. We propose to construct a whitelist model focusing on the order of the control system operation using binary search trees, which can grasp the state of the system when anomalies occur. We also apply combinatorial compression based on BDD (Binary Decision Diagram) to the model to speed up querying and identification of abnormalities. Based on the model designed in this study, we aim to construct a secured control system that selects and executes an appropriate fallback operation based on the state of the system when anomaly is detected.

Cyber Physical Systems (CPS), which contain devices to aid with physical infrastructure activities, comprise sensors, actuators, control units, and physical objects. CPS sends messages to physical devices to carry out computational operations. CPS mainly deals with the interplay among cyber and physical environments. The real-time network data acquired and collected in physical space is stored there, and the connection becomes sophisticated. CPS incorporates cyber and physical technologies at all phases. Cyber Physical Systems are a crucial component of Internet of Things (IoT) technology. The CPS is a traditional concept that brings together the physical and digital worlds inhabit. Nevertheless, CPS has several difficulties that are likely to jeopardise our lives immediately, while the CPS's numerous levels are all tied to an immediate threat, therefore necessitating a look at CPS security. Due to the inclusion of IoT devices in a wide variety of applications, the security and privacy of users are key considerations. The rising level of cyber threats has left current security and privacy procedures insufficient. As a result, hackers can treat every person on the Internet as a product. Deep Learning (DL) methods are therefore utilised to provide accurate outputs from big complex databases where the outputs generated can be used to forecast and discover vulnerabilities in IoT systems that handles medical data. Cyber-physical systems need anomaly detection to be secure. However, the rising sophistication of CPSs and more complex attacks means that typical anomaly detection approaches are unsuitable for addressing these difficulties since they are simply overwhelmed by the volume of data and the necessity for domain-specific knowledge. The various attacks like DoS, DDoS need to be avoided that impact the network performance. In this paper, an effective Network Cluster Reliability Model with enhanced security and privacy levels for the data in IoT for Anomaly Detection (NSRM-AD) using deep learning model is proposed. The security levels of the proposed model are contrasted with the proposed model and the results represent that the proposed model performance is accurate