This paper presents a scalable single-input-multiple-output DC/DC converter targeting load transient response and security improvement for low-power System-on-Chips (SoCs). A two-stage modular architecture is introduced to enable scalability. The shared switched-capacitor pre-charging circuits are implemented to improve load transient response and decouple correlations between inputs and outputs. The demo version of the converter has three identical outputs, each supporting 0.3V to 0.9V with a maximum load current of 150mA. Based on post-layout simulation results in 32nm CMOS process, the converter output provides 19.3V/μs reference tracking speed and 27mA/ns workload transitions with negligible voltage droops or spikes. No cross regulation is observed at any outputs with a worst-case voltage ripple of 68mV. Peak efficiency reaches 85.5% for each output. With variable delays added externally, the input-output correlations can change 10 times and for steady-state operation, such correlation factors are always kept below 0.05. The converter is also scaled to support 6 outputs with only 0.56mm2 more area and maintains same load transient response performance.

Securing cloud configurations is an elusive task, which is left up to system administrators who have to base their decisions on "trial and error" experimentations or by observing good practices (e.g., CIS Benchmarks). We propose a knowledge, AND/OR, graphs approach to model cloud deployment security objects and vulnerabilities. In this way, we can capture relationships between configurations, permissions (e.g., CAP\_SYS\_ADMIN), and security profiles (e.g., AppArmor and SecComp). Such an approach allows us to suggest alternative and safer configurations, support administrators in the study of what-if scenarios, and scale the analysis to large scale deployments. We present an initial validation and illustrate the approach with three real vulnerabilities from known sources.

A unified cloud management platform is the key to efficient and secure management of cloud computing resources. To improve the operation effect of the power cloud service platform, power companies can use the micro-service architecture technology to carry out data processing, information integration, and innovative functional architecture of the power cloud service platform, realize the optimal design of the power cloud service platform and improve the power cloud service platform-security service quality. According to the technical requirements of the power cloud security management platform, this paper designs the technical architecture of the power unified cloud security management platform and expounds on the functional characteristics of the cloud security management platform to verify the feasibility and effectiveness of the cloud security management platform.

We continue to tackle the problem of poorly defined security metrics by building on and improving our previous work on designing sound security metrics. We reformulate the previous method into a set of conditions that are clearer and more widely applicable for deriving sound security metrics. We also modify and enhance some concepts that led to an unforeseen weakness in the previous method that was subsequently found by users, thereby eliminating this weakness from the conditions. We present examples showing how the conditions can be used to obtain sound security metrics. To demonstrate the conditions' versatility, we apply them to show that an aggregate security metric made up of sound security metrics is also sound. This is useful where the use of an aggregate measure may be preferred, to more easily understand the security of a system.

This article focuses on analyzing the application characteristics of electric power big data, determining the advantages that electric power big data provides to the development of enterprises, and expounding the power information security protection technology and management measures under the background of big data. Focus on the protection of power information security, and fundamentally control the information security control issues of power enterprises. Then analyzed the types of big data structure and effective measurement modeling, and finally combined with the application status of big data concepts in the construction of electric power information networks, and proposed optimization strategies, aiming to promote the effectiveness of big data concepts in power information network management activities. Applying the creation conditions, the results show that the measurement model is improved by 7.8%

This paper belongs to a sequence of manuscripts that discuss generic and easy-to-apply security metrics for Strong PUFs. These metrics cannot and shall not fully replace in-depth machine learning (ML) studies in the security assessment of Strong PUF candidates. But they can complement the latter, serve in initial PUF complexity analyses, and are much easier and more efficient to apply: They do not require detailed knowledge of various ML methods, substantial computation times, or the availability of an internal parametric model of the studied PUF. Our metrics also can be standardized particularly easily. This avoids the sometimes inconclusive or contradictory findings of existing ML-based security test, which may result from the usage of different or non-optimized ML algorithms and hyperparameters, differing hardware resources, or varying numbers of challenge-response pairs in the training phase.This first manuscript within the abovementioned sequence treats one of the conceptually most straightforward security metrics on that path: It investigates the effects that small perturbations in the PUF-challenges have on the resulting PUF-responses. We first develop and implement several sub-metrics that realize this approach in practice. We then empirically show that these metrics have surprising predictive power, and compare our obtained test scores with the known real-world security of several popular Strong PUF designs. The latter include (XOR) Arbiter PUFs, Feed-Forward Arbiter PUFs, and (XOR) Bistable Ring PUFs. Along the way, our manuscript also suggests techniques for representing the results of our metrics graphically, and for interpreting them in a meaningful manner.

In this study, the effect of surface treatment on the boding strength between Quad flat package (QFP) and quartz was investigated for establishing a QFP/quartz glass bonding technique. This bonding technique is necessary to prevent bond failure at the nano-artifact metrics (NAM) chip and adhesive interface against physical attacks such as counterfeiting and tampering of edge AI devices that use NAM chips. Therefore, we investigated the relationship between surface roughness and tensile strength by applying surface treatments such as vacuum ultraviolet (VUV) and Ar/O2 plasma. All QFP/quartz glass with surface treatments such as VUV and Ar/O2 plasma showed increased bond strength. Surface treatment and bonding technology for QFP and quartz glass were established to realize NAM chip mounting.

This paper presents a MATLAB Graphical User Interface (GUI) based tool that determines the performance evaluation metrics of the physically unclonable functions (PUFs). The PUFs are hardware security primitives which can be utilized in several hardware security applications like integrated circuits protection, device authentication, secret key generation, and hardware obfuscation. Like any other technology approach, PUFs evaluation requires testing different performance metrics, each of which can be determined by at least one mathematical equation. The proposed tool (PUFs Tool) reads the PUF instances’ output and then computes and generates the values of the main PUFs’ performance metrics: uniqueness, reliability, uniformity, and bit-aliasing. In addition, it generates a bar code for each PUF instance considered in the evaluation process. The PUFs Tool is designed and developed using the app designer of MATLAB software 2021b.

The vehicular networks extend the internet services to road edge. They allow users to stay connected offering them a set of safety and infotainment services like weather forecasts and road conditions. The security and privacy are essential issues in computing systems and networks. They are particularly important in vehicular networks due to their direct impact on the users’ safety on road. Various researchers have concentrated their efforts on resolving these two issues in vehicular networks. A great number of researches are found in literature and with still existing open issues and security risks to be solved, the research is continuous in this area. However, the researchers may face some difficulties in choosing the correct method to prove their works or to illustrate their excellency in comparison with existing solutions. In this paper, we review a set of evaluation methodologies and metrics to measure, proof or analyze privacy and security solutions. The aim of this review is to illuminate the readers about the possible existing methods to help them choose the correct techniques to use and reduce their difficulties.

Any type of engineered design requires metrics for trading off both desirable and undesirable properties. For integrated circuits, typical properties include circuit size, performance, power, etc., where for example, performance is a desirable property and power consumption is not. Security metrics, on the other hand, are extremely difficult to develop because there are active adversaries that intend to compromise the protected circuitry. This implies metric values may not be static quantities, but instead are measures that degrade depending on attack effectiveness. In order to deal with this dynamic aspect of a security metric, a general attack model is proposed that enables the effectiveness of various security approaches to be directly compared in the context of an attack. Here, we describe, define and demonstrate that the metrics presented are both meaningful and measurable.

Autonomous vehicles (AVs) are capable of making driving decisions autonomously using multiple sensors and a complex autonomous driving (AD) software. However, AVs introduce numerous unique security challenges that have the potential to create safety consequences on the road. Security mechanisms require a benchmark suite and an evaluation framework to generate comparable results. Unfortunately, AVs lack a proper benchmarking framework to evaluate the attack and defense mechanisms and quantify the safety measures. This paper introduces BenchAV – a security benchmark suite and evaluation framework for AVs to address current limitations and pressing challenges of AD security. The benchmark suite contains 12 security and performance metrics, and an evaluation framework that automates the metric collection process using Carla simulator and Robot Operating System (ROS).

The most vital requirement for the electric power system as a critical infrastructure is its security of supply. In course of the transition of the electric energy system, however, the security provided by the N-1 principle increasingly reaches its limits. The IT/OT convergence changes the threat structure significantly. New risk factors, that can lead to major blackouts, are added to the existing ones. The problem, however, the cost of security optimizations are not always in proportion to their value. Not every component is equally critical to the energy system, so the question arises, "How secure does my system need to be?". To adress the security-by-design principle, this contribution introduces a Security Metric (SecMet) that can be applied to Smart Grid architectures and its components and deliver an indicator for the "Securitisation Need" based on an individual risk assessment.

The electrical grid connects all the generating stations to supply uninterruptible power to the consumers. With the advent of technology, smart sensors and communication are integrated with the existing grid to behave like a smart system. This smart grid is a two-way communication that connects the consumers and producers. It is a connected smart network that integrates electricity generation, transmission, substation, distribution, etc. In this smart grid, clean, reliable power with a high-efficiency rate of transmission is available. In this paper, a highly efficient smart management system of a smart grid with overall protection is proposed. This management system checks and monitors the parameters periodically. This future technology also develops a smart transformer with ac and dc compatibility, for self-protection and for the healing process.

In order to solve the problem of high data collision probability, high access delay and high-power consumption in random access process of power Internet of Things, an access scheme for large-scale micro-power wireless sensors based on slot-scheduling and hybrid mode is presented. This scheme divides time into different slots and designs a slot-scheduling algorithm according to network workload and power consumption. Sensors with different service priorities are arranged in different time slots for competitive access, using appropriate random-access mechanism. And rationally arrange the number of time slots and competing end-devices in different time slots. This scheme is able to meet the timeliness requirements of different services and reduce the overall network power consumption when dealing with random access scenarios of large-scale micro-power wireless sensor network. Based on the simulation results of actual scenarios, this access scheme can effectively reduce the overall power consumption of the network, and the high priority services can meet the timeliness requirements on the premise of lower power consumption, while the low priority services can further reduce power consumption.

Traditional power consumption management systems are not showing enough reliability and thus, smart grid technology has been introduced to reduce the excess power wastages. In the context of smart grid systems, network communication is another term that is used for developing the network between the users and the load profiles. Cloud computing and clustering are also executed for efficient power management. Based on the facts, this research is going to identify wireless network communication systems to monitor and control smart grid power consumption. Primary survey-based research has been carried out with 62 individuals who worked in the smart grid system, tracked, monitored and controlled the power consumptions using WSN technology. The survey was conducted online where the respondents provided their opinions via a google survey form. The responses were collected and analyzed on Microsoft Excel. Results show that hybrid commuting of cloud and edge computing technology is more advantageous than individual computing. Respondents agreed that deep learning techniques will be more beneficial to analyze load profiles than machine learning techniques. Lastly, the study has explained the advantages and challenges of using smart grid network communication systems. Apart from the findings from primary research, secondary journal articles were also observed to emphasize the research findings.

This article describes an analysis of the key technologies currently applied to improve the quality, efficiency, safety and sustainability of Smart Grid systems and identifies the tools to optimize them and possible gaps in this area, considering the different energy sources, distributed generation, microgrids and energy consumption and production capacity. The research was conducted with a qualitative methodological approach, where the literature review was carried out with studies published from 2019 to 2022, in five (5) databases following the selection of studies recommended by the PRISMA guide. Of the five hundred and four (504) publications identified, ten (10) studies provided insight into the technological trends that are impacting this scenario, namely: Internet of Things, Big Data, Edge Computing, Artificial Intelligence and Blockchain. It is concluded that to obtain the best performance within Smart Grids, it is necessary to have the maximum synergy between these technologies, since this union will enable the application of advanced smart digital technology solutions to energy generation and distribution operations, thus allowing to conquer a new level of optimization.

For some countries around the world, meeting demand is a serious concern. Power supply market is increasingly increasing, posing a big challenge for various countries throughout the world. The increasing expansion in the market for power needs upgrading system dependability to increase the smart grid's resilience. This smart electric grid has a sensor that analyses grid power availability and sends regular updates to the organisation. The internet is currently being utilized to monitor processes and place orders for running variables from faraway places. A large number of scanners have been used to activate electrical equipment for domestic robotics for a long period in the last several days. Conversely, if it is not correctly implemented, it will have a negative impact on cost-effectiveness as well as productivity. For something like a long time, home automation has relied on a large number of sensor nodes to control electrical equipment. Since there are so many detectors, this isn't cost-effective. In this article, develop and accept a wireless communication component and a management system suitable for managing independent efficient network units from voltage rises and voltage control technologies in simultaneous analyzing system reliability in this study. This research paper has considered secondary method to collect relevant and in-depth data related to the wireless sensor network and its usage in smart grid monitoring.

In view of the problems that the existing power grid risk assessment mainly depends on the data fusion of decision-making level, which has strong subjectivity and less effective information, this paper proposes a risk assessment method of microgrid system based on random matrix theory. Firstly, the time series data of multiple sensors are constructed into a high-dimensional matrix according to the different parameter types and nodes; Then, based on random matrix theory and sliding time window processing, the average spectral radius sequence is calculated to characterize the state of microgrid system. Finally, an example is given to verify the effectiveness of the method.

Current sensors are widely used in power grid for power metering, automation and power equipment monitoring. Since the tradeoff between the sensitivity and the measurement range needs to be made to design a current sensor, it is difficult to deploy one sensor to measure both the small-magnitude and the large-magnitude current. In this research, we design a surface-mount current sensor by using the tunneling magneto-resistance (TMR) devices and show that the tradeoff between the sensitivity and the detection range can be broken. Two TMR devices of different sensitivity degrees were integrated into one current sensor module, and a signal processing algorithm was implemented to fusion the outputs of the two TMR devices. Then, a platform was setup to test the performance of the surface-mount current sensor. The results showed that the designed current sensor could measure the current from 2 mA to 100 A with an approximate 93 dB dynamic range. Besides, the nonintrusive feature of the surface-mount current sensor could make it convenient to be deployed on-site.

Smart grid is the next generation for power generation, consumption and distribution. However, with the introduction of smart communication in such sensitive components, major risks from cybersecurity perspective quickly emerged. This survey reviews and reports on the state-of-the-art techniques for detecting cyber attacks in smart grids, mainly through machine learning techniques.

Satisfying the growing demand for electricity is a huge challenge for electricity providers without a robust and good infrastructure. For effective electricity management, the infrastructure has to be strengthened from the generation stage to the transmission and distribution stages. In the current electrical infrastructure, the evolution of smart grids provides a significant solution to the problems that exist in the conventional system. Enhanced management visibility and better monitoring and control are achieved by the integration of wireless sensor network technology in communication systems. However, to implement these solutions in the existing grids, the infrastructural constraints impose a major challenge. Along with the choice of technology, it is also crucial to avoid exorbitant implementation costs. This paper presents a self-stabilizing hierarchical algorithm for the existing electrical network. Neighborhood Area Networks (NAN) and Home Area Networks (HAN) layers are used in the proposed architecture. The Home Node (HN), Simple Node (SN) and Cluster Head (CH) are the three types of nodes used in the model. Fraudulent users in the system are identified efficiently using the proposed model based on the observations made through simulation on OMNeT++ simulator.

The electromagnetic energy harvesting technology is a new and effective way to supply power to the condition monitoring sensors installed on or near the transmission line. We will use Computer Simulation Technology Software to simulate the different designs of stand-alone electromagnetic energy harvesters The power generated by energy harvesters of different design structures is compared and analyzed through simulation and experimental results. We then propose an improved design of energy harvester.

Over the past decade, smart grids have been widely implemented. Real-time pricing can better address demand-side management in smart grids. Real-time pricing requires managers to interact more with consumers at the data level, which raises many privacy threats. Thus, we introduce differential privacy into the Real-time pricing for privacy protection. However, differential privacy leaves more space for an adversary to compromise the robustness of the system, which has not been well addressed in the literature. In this paper, we propose a novel active attack detection scheme against stealthy attacks, and then give the proof of correctness and effectiveness of the proposed scheme. Further, we conduct extensive experiments with real datasets from CER to verify the detection performance of the proposed scheme.

Managing electricity effectively also means knowing as accurately as possible when, where and how electricity is used. Detailed metering and timely allocation of consumption can help identify specific areas where energy consumption is excessive and therefore requires action and optimization. All those interested in the measurement process (distributors, sellers, wholesalers, managers, ultimately customers and new prosumer figures - producers / consumers -) have an interest in monitoring and managing energy flows more efficiently, in real time.Smart meter plays a key role in sending data containing consumer measurements to both the producer and the consumer, thanks to chain 2. It allows you to connect consumption and production, during use and the customer’s identity, allowing billing as Time-of-Use or Real-Time Pricing, and through the new two-way channel, this information is also made available to the consumer / prosumer himself, enabling new services such as awareness of energy consumption at the very moment of energy use.This is made possible by latest generation devices that "talk" with the end user, which use chain 2 and the power line for communication.However, the implementation of smart meters and related digital technologies associated with the smart grid raises various concerns, including, privacy. This paper provides a comparative perspective on privacy policies for residential energy customers, moreover, it will be possible to improve security through the blockchain for the introduction of smart contracts.

With the proliferation of data in Internet-related applications, incidences of cyber security have increased manyfold. Energy management, which is one of the smart city layers, has also been experiencing cyberattacks. Furthermore, the Distributed Energy Resources (DER), which depend on different controllers to provide energy to the main physical smart grid of a smart city, is prone to cyberattacks. The increased cyber-attacks on DER systems are mainly because of its dependency on digital communication and controls as there is an increase in the number of devices owned and controlled by consumers and third parties. This paper analyzes the major cyber security and privacy challenges that might inflict, damage or compromise the DER and related controllers in smart cities. These challenges highlight that the security and privacy on the Internet of Things (IoT), big data, artificial intelligence, and smart grid, which are the building blocks of a smart city, must be addressed in the DER sector. It is observed that the security and privacy challenges in smart cities can be solved through the distributed framework, by identifying and classifying stakeholders, using appropriate model, and by incorporating fault-tolerance techniques.