This work proposed a unified approach to increase the explainability of the predictions made by Convolution Neural Networks (CNNs) on medical images using currently available Explainable Artificial Intelligent (XAI) techniques. This method in-cooperates multiple techniques such as LISA aka Local Interpretable Model Agnostic Explanations (LIME), integrated gradients, Anchors and Shapley Additive Explanations (SHAP) which is Shapley values-based approach to provide explanations for the predictions provided by Blackbox models. This unified method increases the confidence in the black-box model’s decision to be employed in crucial applications under the supervision of human specialists. In this work, a Chest X-ray (CXR) classification model for identifying Covid-19 patients is trained using transfer learning to illustrate the applicability of XAI techniques and the unified method (LISA) to explain model predictions. To derive predictions, an image-net based Inception V2 model is utilized as the transfer learning model.

The rapid shift towards smart cities, particularly in the era of pandemics, necessitates the employment of e-learning, remote learning systems, and hybrid models. Building adaptive and personalized education becomes a requirement to mitigate the downsides of distant learning while maintaining high levels of achievement. Explainable artificial intelligence (XAI), machine learning (ML), and the internet of behaviour (IoB) are just a few of the technologies that are helping to shape the future of smart education in the age of smart cities through Customization and personalization. This study presents a paradigm for smart education based on the integration of XAI and IoB technologies. The research uses data acquired on students' behaviours to determine whether or not the current education systems respond appropriately to learners' requirements. Despite the existence of sophisticated education systems, they have not yet reached the degree of development that allows them to be tailored to learners' cognitive needs and support them in the absence of face-to-face instruction. The study collected data on 41 learner's behaviours in response to academic activities and assessed whether the running systems were able to capture such behaviours and respond appropriately or not; the study used evaluation methods that demonstrated that there is a change in students' academic progression concerning monitoring using IoT/IoB to enable a relative response to support their progression.

XAI with natural language processing aims to produce human-readable explanations as evidence for AI decision-making, which addresses explainability and transparency. However, from an HCI perspective, the current approaches only focus on delivering a single explanation, which fails to account for the diversity of human thoughts and experiences in language. This paper thus addresses this gap, by proposing a generative XAI framework, INTERACTION (explain aNd predicT thEn queRy with contextuAl CondiTional varIational autO-eNcoder). Our novel framework presents explanation in two steps: (step one) Explanation and Label Prediction; and (step two) Diverse Evidence Generation. We conduct intensive experiments with the Transformer architecture on a benchmark dataset, e-SNLI [1]. Our method achieves competitive or better performance against state-of-the-art baseline models on explanation generation (up to 4.7% gain in BLEU) and prediction (up to 4.4% gain in accuracy) in step one; it can also generate multiple diverse explanations in step two.

Artificial intelligence(AI) is used in decision support systems which learn and perceive features as a function of the number of layers and the weights computed during training. Due to their inherent black box nature, it is insufficient to consider accuracy, precision and recall as metrices for evaluating a model's performance. Domain knowledge is also essential to identify features that are significant by the model to arrive at its decision. In this paper, we consider a use case of face mask recognition to explain the application and benefits of XAI. Eight models used to solve the face mask recognition problem were selected. GradCAM Explainable AI (XAI) is used to explain the state-of-art models. Models that were selecting incorrect features were eliminated even though, they had a high accuracy. Domain knowledge relevant to face mask recognition viz., facial feature importance is applied to identify the model that picked the most appropriate features to arrive at the decision. We demonstrate that models with high accuracies need not be necessarily select the right features. In applications requiring rapid deployment, this method can act as a deciding factor in shortlisting models with a guarantee that the models are looking at the right features for arriving at the classification. Furthermore, the outcomes of the model can be explained to the user enhancing their confidence on the AI model being deployed in the field.

The security of Energy Data collection is the basis of achieving reliability and security intelligent of smart grid. The newest security communication of Data collection is Zero Trust communication; The Strategy of Zero Trust communication is that don’t trust any device of outside or inside. Only that device authenticate is successful and software and hardware is more security, the Energy intelligent power system allow the device enroll into network system, otherwise deny these devices. When the device has been communicating with the Energy system, the Zero Trust still need to detect its security and vulnerability, if device have any security issue or vulnerability issue, the Zero Trust deny from network system, it ensures that Energy power system absolute security, which lays a foundation for the security analysis of intelligent power unit.

How can high-level directives concerning risk, cybersecurity and compliance be operationalized in the central nervous system of any organization above a certain complexity? How can the effectiveness of technological solutions for security be proven and measured, and how can this technology be aligned with the governance and financial goals at the board level? These are the essential questions for any CEO, CIO or CISO that is concerned with the wellbeing of the firm. The concept of Zero Trust (ZT) approaches information and cybersecurity from the perspective of the asset to be protected, and from the value that asset represents. Zero Trust has been around for quite some time. Most professionals associate Zero Trust with a particular architectural approach to cybersecurity, involving concepts such as segments, resources that are accessed in a secure manner and the maxim “always verify never trust”. This paper describes the current state of the art in Zero Trust usage. We investigate the limitations of current approaches and how these are addressed in the form of Critical Success Factors in the Zero Trust Framework developed by ON2IT ‘Zero Trust Innovators’ (1). Furthermore, this paper describes the design and engineering of a Zero Trust artefact that addresses the problems at hand (2), according to Design Science Research (DSR). The last part of this paper outlines the setup of an empirical validation trough practitioner oriented research, in order to gain a broader acceptance and implementation of Zero Trust strategies (3). The final result is a proposed framework and associated technology which, via Zero Trust principles, addresses multiple layers of the organization to grasp and align cybersecurity risks and understand the readiness and fitness of the organization and its measures to counter cybersecurity risks.

Under the situation of regular epidemic prevention and control, teleworking has gradually become a normal working mode. With the development of modern information technologies such as big data, cloud computing and mobile Internet, it's become a problem that how to build an effective security defense system to ensure the information security of teleworking in complex network environment while ensuring the availability, collaboration and efficiency of teleworking. One of the solutions is Zero Trust Network(ZTN), most enterprise infrastructures will operate in a hybrid zero trust/perimeter-based mode while continuing to invest in IT modernization initiatives and improve organization business processes. In this paper, we have systematically studied the zero trust principles, the logical components of zero trust architecture and the key technology of zero trust network. Based on the abstract model of zero trust architecture and information security technologies, a prototype has been realized which suitable for iOS terminals to access enterprise resources safely in teleworking mode.

Wireless mesh networks are increasingly deployed as a flexible and low-cost alternative for providing wireless services for a variety of applications including community mesh networking, medical applications, and disaster ad hoc communications, sensor and IoT applications. However, challenges remain such as interference, contention, load imbalance, and congestion. To address these issues, previous work employ load adaptive routing based on load sensitive routing metrics. On the other hand, such approach does not immediately improve network performance because the load estimates used to choose routes are themselves affected by the resulting routing changes in a cyclical manner resulting to oscillation. Although this is not a new phenomenon and has been studied in wired networks, it has not been investigated extensively in wireless mesh and/or sensor networks. We present these instabilities and how they pose performance, security, and energy issues to these networks. Accordingly, we present a feedback-aware mapping system called FARM that handles these instabilities in a manner analogous to a control system with feedback control. Results show that FARM stabilizes routes that improves network performance in throughput, delay, energy efficiency, and security.

Internet of Things (IoT) evolution calls for stringent communication demands, including low delay and reliability. At the same time, wireless mesh technology is used to extend the communication range of IoT deployments, in a multi-hop manner. However, Wireless Mesh Networks (WMNs) are facing link failures due to unstable topologies, resulting in unsatisfied IoT requirements. Named-Data Networking (NDN) can enhance WMNs to meet such IoT requirements, thanks to the content naming scheme and in-network caching, but necessitates adaptability to the challenging conditions of WMNs.In this work, we argue that Software-Defined Networking (SDN) is an ideal solution to fill this gap and introduce an integrated SDN-NDN deployment over WMNs involving: (i) global view of the network in real-time; (ii) centralized decision making; and (iii) dynamic NDN adaptation to network changes. The proposed system is deployed and evaluated over the wiLab.1 Fed4FIRE+ test-bed. The proof-of-concept results validate that the centralized control of SDN effectively supports the NDN operation in unstable topologies with frequent dynamic changes, such as the WMNs.

ETSI DECT-2020 New Radio (NR) is a new flexible radio interface targeted to support a broad range of wireless Internet of Things (IoT) applications. Recent reports have shown that DECT-2020 NR achieves good delay performance and it has been shown to fulfill both massive machine-type communications (mMTC) and ultra-reliable low latency communications (URLLC) requirements for 5th generation (5G) networks. A unique aspect of DECT-2020 as a 5G technology is that it is an autonomous wireless mesh network (WMN) protocol where the devices construct and uphold the network independently without the need for base stations or core network architecture. Instead, DECT-2020 NR relies on part of the network devices taking the role of a router to relay data through the network. This makes deployment of a DECT-2020 NR network affordable and extremely easy, but due to the nature of the medium access protocol, the routing responsibility adds an additional energy consumption burden to the nodes, who in the IoT domain are likely to be equipped with a limited battery capacity. In this paper, we analyze by system level simulations the energy consumption of DECT-2020 NR networks with different network sizes and topologies and how the reported low latencies can be upheld given the energy constraints of IoT devices.

This paper proposes an improved version of the newly developed Honey Badger Algorithm (HBA), called Generalized opposition Based-Learning HBA (GOBL-HBA), for solving the mesh routers placement problem. The proposed GOBLHBA is based on the integration of the generalized opposition-based learning strategy into the original HBA. GOBL-HBA is validated in terms of three performance metrics such as user coverage, network connectivity, and fitness value. The evaluation is done using various scenarios with different number of mesh clients, number of mesh routers, and coverage radius values. The simulation results revealed the efficiency of GOBL-HBA when compared with the classical HBA, Genetic Algorithm (GA), and Particle Swarm optimization (PSO).

This paper investigates the robustness of the received signal strength (RSS)-based physical layer authentication (PLA) for wireless mesh networks, through experimental results. Specifically, we develop a secure wireless mesh networking framework and apply the RSS-based PLA scheme, with the aim to perform continuous authentication. The mesh setup comprises three Raspberry-PI4 computing nodes (acting as Alice, Bob, and Eve) and a server. The server role is to perform the initial authentication when a new node joins the mesh network. After that, the legitimate nodes in the mesh network perform continuous authentication, by leveraging the RSS feature of wireless signals. In particular, Bob tries to authenticate Alice in the presence of Eve. The performance of the presented framework is quantified through extensive experimental results in an outdoor environment, where various nodes' positions, relative distances, and pedestrian speeds scenarios are considered. The obtained results demonstrate the robustness of the underlying model, where an authentication rate of 99% for the static case can be achieved. Meanwhile, at the pedestrian speed, the authentication rate can drop to 85%. On the other hand, the detection rate improves when the distance between the legitimate and wiretap links is large (exceeds 20 meters) or when Alice and Eve are moving in different mobility patterns.

Mesh networks based on the wireless local area network (WLAN) technology, as specified by the standards amendment IEEE 802.11s, provide for a flexible and low-cost interconnection of devices and embedded systems for various use cases. To assess the real-world performance of WLAN mesh networks and potential optimization strategies, suitable testbeds and measurement tools are required. Designed for highly automated transport-layer throughput and latency measurements, the software FLExible Network Tester (Flent) is a promising candidate. However, so far Flent does not integrate information specific to IEEE 802.11s networks, such as peer link status data or mesh routing metrics. Consequently, we propose Flent extensions that allow to additionally capture IEEE 802.11s information as part of the automated performance tests. For the functional validation of our extensions, we conduct Flent measurements in a mesh mobility scenario using the network emulation framework Mininet-WiFi.

This paper presents an energy consumption model of the sensor nodes in TDMA wireless mesh sensor network using merged data collecting (MDC) methods. Defining the energy consumption of the nodes in wireless mesh networks is crucial for battery lifetime estimation. In this paper, we describe the semiempirical model of the energy consumption of MDC method in the TDMA mesh sensor networks using flooding routing. In the model the low-level constraints are based on the measured energy consumption of the sensor nodes in the different operation phases.

This paper proposes a RSSI-based routing protocol for smart pole mesh networks equipped with multiple IEEE 802.11p/WAVE radios. In the IEEE 802.11p based multi-radio multi-channel environments, the performance of traditional mesh routing protocols is severely degraded because of metric measurement overhead. The periodic probe messages for measuring the quality of each channel incurs a large overhead due to the channel switching delay. To solve such an overhead problem, we introduce a routing metric that estimates expected transmission time and proposes a light-weight channel allocation algorithm based on RSSI value only. We evaluate the performance of the proposed solution through simulation experiments with NS-3. Simulation results show that it can improve the network performance in terms of latency and throughput, compared to the legacy WCETT routing scheme.

The aim of this paper is to describe the battery lifetime estimation and energy consumption model of the sensor nodes in TDMA wireless mesh sensor using merged data collecting (MDC) methods based on lithium thionyl chloride batteries. Defining the energy consumption of the nodes in wireless mesh networks is crucial for battery lifetime estimation. In this paper, we describe the timing, energy consumption, and battery lifetime estimation of the MDC method in the TDMA mesh sensor networks using flooding routing. For the battery life estimation, we made a semiempirical model that describes the energy consumption of the nodes with a real battery model. In this model, the low-level constraints are based on the measured energy consumption of the sensor nodes in different operation phases.

Intelligent Environments (IEs) enrich the physical world by connecting it to software applications in order to increase user comfort, safety and efficiency. IEs are often supported by wireless networks of smart sensors and actuators, which offer multi-year battery life within small packages. However, existing radio mesh networks suffer from high latency, which precludes their use in many user interface systems such as real-time speech, touch or positioning. While recent advances in optical networks promise low end-to-end latency through symbol-synchronous transmission, current approaches are power hungry and therefore cannot be battery powered. We tackle this problem by introducing BoboLink, a mesh network that delivers low-power and low-latency optical networking through a combination of symbol-synchronous transmission and a novel wake-up technology. BoboLink delivers mesh-wide wake-up in 1.13ms, with a quiescent power consumption of 237µW. This enables building-wide human computer interfaces to be seamlessly delivered using wireless mesh networks for the first time.

This work analyzed the coding gain that is provided in 6LoWPAN transceivers when channel-coding methods are used. There were made improvements at physical layer of 6LoWPAN technology in the system suggested. Performance analysis was performed using turbo, LDPC and convolutional codes on IEEE 802.15.4 standard that is used in the relevant physical layer. Code rate of convolutional and turbo codes are set to 1/3 and 1/4. For LDPC codes, the code rate is set as 3/4 and 5/6. According to simulation results obtained from the MATLAB environment, turbo codes give better results than LDPC and convolutional codes. It is seen that an average of 3 dB to 8 dB gain is achieved in turbo codes, in LDPC and convolutional coding, it is observed that the gain is between 2 dB and 6 dB depending on the modulation type and code rate.

The Internet of Things (IoT) continuously grows as applications require connectivity and sensor networks are being deployed in multiple application domains. With the increased applicability demand, the need for testing and development frameworks also increases. This paper presents a novel simulation framework for testing IPv6 over Low Power Wireless Personal Networks (6LoWPAN) networks using the Mininet-WiFi simulator. The goal of the simulation framework is to allow easier automation testing of large-scale networks and to also allow easy configuration. This framework is a starting point for many development scenarios targeting traffic management, Quality of Service (QoS) or security network features. A basic smart city simulation is presented which demonstrates the working principles of the framework.

With the rapid development of the Internet of Things (IoT), a large amount of data is exchanged between various communicating devices. Since the data should be communicated securely between the communicating devices, the network security is one of the dominant research areas for the 6LoWPAN IoT applications. Meanwhile, 6LoWPAN devices are vulnerable to attacks inherited from both the wireless sensor networks and the Internet protocols. Thus intrusion detection systems have become more and more critical and play a noteworthy role in improving the 6LoWPAN IoT networks. However, most intrusion detection systems focus on the attacked areas in the IoT networks instead of precisely on certain IoT nodes. This may lead more resources to further detect the compromised nodes or waste resources when detaching the whole attacked area. In this paper, we therefore proposed a new precisional detection strategy for 6LoWPAN Networks, named as PDS-6LoWPAN. In order to validate the strategy, we evaluate the performance and applicability of our solution with a thorough simulation by taking into account the detection accuracy and the detection response time.

Consensus is a basic building block in distributed systems for a myriad of related problems that involve agreement. For asynchronous networks, consensus has been proven impossible, and is well known as Augean task. Failure Detectors (FDs) have since emerged as a possible remedy, able to solve consensus in asynchronous systems under certain assumptions. With the increasing use of asynchronous, wireless Internet of Things (IoT) technologies, such as IEEE 802.15.4/6LoWPAN, the demand of applications that require some form of reliability and agreement is on the rise. What was missing so far is an FD that can operate under the tight constraints offered by Low Power and Lossy Networks (LLNs) without compromising the efficiency of the network. We present 6LoFD, an FD specifically aimed at energy and memory efficient operation in small scale, unreliable networks, and evaluate its working principles by using an ns-3 implementation of 6LoFD.

The Internet of Things (IoT) is a novel paradigm that enables the development of a slew of Services for the future of technology advancements. When it comes to IoT applications, the cyber and physical worlds can be seamlessly integrated, but they are essentially limitless. However, despite the great efforts of standardization bodies, coalitions, companies, researchers, and others, there are still a slew of issues to overcome in order to fully realize the IoT's promise. These concerns should be examined from a variety of perspectives, including enabling technology, applications, business models, and social and environmental consequences. The focus of this paper is on open concerns and challenges from a technological standpoint. We will study the differences in technical such Sigfox, NB-IoT, LoRa, and 6LowPAN, and discuss their advantages and disadvantage for each technology compared with other technologies. Demonstrate that each technology has a position in the internet of things market. Each technology has different advantages and disadvantages it depends on the quality of services, latency, and battery life as a mention. The first will be analysis IoT technologies. SigFox technology offers a long-range, low-power, low-throughput communications network that is remarkably resistant to environmental interference, enabling information to be used efficiently in a wide variety of applications. We analyze how NB-IoT technology will benefit higher-value-added services markets for IoT devices that are willing to pay for exceptionally low latency and high service quality. The LoRa technology will be used as a low-cost device, as it has a very long-range (high coverage).

As a large number of sensor nodes as well as limited resources such as energy, memory, computing power, as well as bandwidth. Lossy linkages connect these nodes together. In early 2008,IETF working group looked into using current routing protocols for LLNs. Routing Over minimum power and Lossy networksROLL standardizes an IPv6 routing solution for LLNs because of the importance of LLNs in IoT.IPv6 Routing Protocol is based on the 6LoWPAN standard. RPL has matured significantly. The research community is becoming increasingly interested in it. The topology of RPL can be built in a variety of ways. It creates a topology in advance. Due to the lack of a complete review of RPL, in this paper a mobility management framework has been proposed along with experimental evaluation by applying parameters likePacket Delivery Ratio, throughput, end to end delay, consumed energy on the basis of the various parameters and its analysis done accurately. Finally, this paper can help academics better understand the RPL and engage in future research projects to improve it.

The “Internet of Things (IoT)” is a term that describes physical sensors, processing software, power and other technologies to connect or interchange information between systems and devices through the Internet and other forms of communication. RPL protocol can efficiently establish network routes, communicate routing information, and adjust the topology. The 6LoWPAN concept was born out of the belief that IP should protect even the tiniest devices, and for low-power devices, minimal computational capabilities should be permitted to join IoT. The DIS-Flooding against RPL-based IoT with its mitigation techniques are discussed in this paper.

Due to the widespread use of the Internet of Things (IoT) in recent years, the need for IoT technologies to handle communications with the rest of the globe has grown dramatically. Wireless sensor networks (WSNs) play a vital role in the operation of the IoT. The creation of Internet of Things operating systems (OS), which can handle the newly constructed IoT hardware, as well as new protocols and procedures for all communication levels, all of which are now in development, will pave the way for the future. When compared to other devices, these gadgets require a comparatively little amount of electricity, memory, and other resources. This has caused the scientific community to become more aware of the relevance of IoT device operating systems as a result of their findings. These devices may be made more versatile and powerful by including an operating system that contains real-time capabilities, kernel, networking, and other features, among other things. IEEE 802.15.4 networks are linked together using IPv6, which has a wide address space and so enables more devices to connect to the internet using the 6LoWPAN protocol. It is necessary to address some privacy and security issues that have arisen as a result of the widespread use of the Internet, notwithstanding the great benefits that have resulted. For the Internet of Things operating systems, this research has provided a network security architecture that ensures secure communication by utilizing the Cooja network simulator in combination with the Contiki operating system and demonstrate and explained how the nodes can protect from the network layer and physical layer attacks. Also, this research has depicted the energy consumption results of each designated node type during the authentication and communication process. Finally, proposed a few further improvements for the architecture which will enhance the network layer protection.