Key management for self-organized wireless ad-hoc networks using peer-to-peer (P2P) keys is the primary goal of this article (SOWANs). Currently, wireless networks have centralized security architectures, making them difficult to secure. In most cases, ad-hoc wireless networks are not connected to trusted authorities or central servers. They are more prone to fragmentation and disintegration as a result of node and link failures. Traditional security solutions that rely on online trusted authorities do not work together to protect networks that are not planned. With open wireless networks, anyone can join or leave at any time with the right equipment, and no third party is required to verify their identity. These networks are best suited for this proposed method. Each node can make, distribute, and revoke its keying material in this paper. A minimal amount of communication and computation is required to accomplish this task. So that they can authenticate one another and create shared keys, nodes in the self-organized version of the system must communicate via a secure side channel between the users' devices.

Wireless ad hoc networks are characterized by dynamic topology and high node mobility. Network attacks on wireless ad hoc networks can significantly reduce performance metrics, such as the packet delivery ratio from the source to the destination node, overhead, throughput, etc. The article presents an experimental study of an intrusion detection system prototype in mobile ad hoc networks based on machine learning. The experiment is carried out in a MANET segment of 50 nodes, the detection and prevention of DDoS and cooperative blackhole attacks are investigated. The dependencies of features on the type of network traffic and the dependence of performance metrics on the speed of mobile nodes in the network are investigated. The conducted experimental studies show the effectiveness of an intrusion detection system prototype on simulated data.

Vehicle Ad-Hoc Networks (VANETs) are a special type of Mobile Ad-Hoc Network (MANETs). In VANETs, a group of vehicles communicates with each other to transfer data without a need for a fixed infrastructure. In this paper, we compare the performance of two routing protocols: Ad-hoc on Demand Distance Vector protocol (AODV) and Destination-Sequenced Distance Vector protocol (DSDV) in VANETs. We measure the reliability of each protocol in the packet delivery.

This paper addresses the issues in managing group key among clusters in Mobile Ad hoc Networks (MANETs). With the dynamic movement of the nodes, providing secure communication and managing secret keys in MANET is difficult to achieve. In this paper, we propose a distributed secure broadcast stateless groupkey management framework (DSBS-GKM) for efficient group key management. This scheme combines the benefits of hash function and Lagrange interpolation polynomial in managing MANET nodes. To provide a strong security mechanism, a revocation system that detects and revokes misbehaviour nodes is presented. The simulation results show that the proposed DSBS-GKM scheme attains betterments in terms of rekeying and revocation performance while comparing with other existing key management schemes.

Vehicular Ad-hoc Networks (VANET) are capable of offering inter and intra-vehicle wireless communication among mobility aware computing systems. Nodes are linked by applying concepts of mobile ad hoc networks. VANET uses cases empower vehicles to link to the network to aggregate and process messages in real-time. The proposed paper addresses a security vulnerability known as Sybil attack, in which numerous fake nodes broadcast false data to the neighboring nodes. In VANET, mobile nodes continuously change their network topology and exchange location sensor-generated data in real time. The basis of the presented technique is source testing that permits the scalable identification of Sybil nodes, without necessitating any pre-configuration, which was conceptualized from a comparative analysis of preceding research in the literature.

Mobile Ad-hoc Networks (MANETs) have attracted lots of concerns with its widespread use. In MANETs, wireless nodes usually self-organize into groups to complete collaborative tasks and communicate with one another via public channels which are vulnerable to attacks. Group key management is generally employed to guarantee secure group communication in MANETs. However, most existing group key management schemes for MANETs still suffer from some issues, e.g., receiver restriction, relying on a trusted dealer and heavy certificates overheads. To address these issues, we propose a group key management scheme for MANETs based on an identity-based authenticated dynamic contributory broadcast encryption (IBADConBE) protocol which builds on an earlier work. Our scheme abandons the certificate management and does not need a trusted dealer to distribute a secret key to each node. A set of wireless nodes are allowed to negotiate the secret keys in one round while forming a group. Besides, our scheme is receiver-unrestricted which means any sender can flexibly opt for any favorable nodes of a group as the receivers. Further, our scheme satisfies the authentication, confidentiality of messages, known-security, forward security and backward security concurrently. Performance evaluation shows our scheme is efficient.

Vehicular Ad hoc Network (VANET) is an emerging technology that is used to provide communication between vehicle users. VANET provides communication between one vehicle node to another vehicle node, vehicle to the roadside unit, vehicle to pedestrian, and even vehicle to rail users. Communication between nodes should be very secure and confidential, Since VANET communicates through wireless mode, a malicious node may enter inside the communication zone to hack, inject false messages, and interrupt the communication. A strong protocol is necessary to detect malicious nodes and authenticate the VANET user to protect them from malicious attacks. In this paper, a fuzzy-based trust authentication scheme is used to detect malicious nodes with the Mamdani fuzzy Inference system. The parameter estimation, rules have been framed using MATLAB Mamdani Fuzzy Inference system to select a genuine node for data transmission.

With the rapid growth of wireless communication, sensor technology, and mobile computing, the ad hoc network has gained increasing attention from governments, corporations, and scientific research organisations. Ad hoc and sensor network security has become crucial. Malicious node identification, network resilience and survival, and trust models are among the security challenges discussed. The security of ad hoc networks is a key problem. In this paper, we'll look at a few security procedures and approaches that can be useful in keeping this network secure. We've compiled a list of all the ad networks' descriptions with explanations. Before presenting our conclusions from the examination of the literature, we went through various papers on the issue. The taxonomy diagram for the Ad-hoc Decentralized Network is the next item on the agenda. Security is one of the most significant challenges with an ad hoc network. In most cases, cyber-attackers will be able to connect to a wireless ad hoc network and, as a result, to the device if they reach within signal range. So, we moved on to a discussion of VANET, UAVs security issues discovered in the field. The outcomes of various ad hoc network methods were then summarised in the form tables. Furthermore, the Diffie Hellman Key Exchange is used to investigate strategies for improving ad-hoc network security and privacy in the next section, and a comparison of RSA with Diffie Hellman is also illustrated. This paper can be used as a guide and reference to provide readers with a broad knowledge of wireless ad hoc networks and how to deal with their security issues.

Vehicular Ad-hoc Networks (VANETs) is a very fast emerging research area these days due to their contribution in designing Intelligent transportation systems (ITS). ITS is a well-organized group of wireless networks. It is a derived class of Mobile Ad-hoc Networks (MANETs). VANET is an instant-formed ad-hoc network, due to the mobility of vehicles on the road. The goal of using ITS is to enhance road safety, driving comfort, and traffic effectiveness by alerting the drivers at right time about upcoming dangerous situations, traffic jams, road diverted, weather conditions, real-time news, and entertainment. We can consider Vehicular communication as an enabler for future driverless cars. For these all above applications, it is necessary to make a threat-free environment to establish secure, fast, and efficient communication in VANETs. In this paper, we had discussed the overviews, characteristics, securities, applications, and various data dissemination techniques in VANET.

Visible light communication (VLC) is a short-range wireless optical communication that can transmit data by switching lighting elements at high speeds in indoor areas. In common areas, VLC can provide data security at every layer of communication by using physical layer security (PLS) techniques as well as existing cryptography-based techniques. In the literature, PLS techniques have generally been studied for monochrome VLC systems, and multicolor VLC studies are quite limited. In this study, to the best of authors’ knowledge, null steering (NS) and artificial noise (AN), which are widely used PLS methods, have been applied to multi-colored LED-based VLC systems for the first time in the literature and the achievable secrecy rate has been calculated.

Wireless-fidelity (Wi-Fi) and Bluetooth are examples of modern wireless communication technologies that employ radio waves as the primary channel for data transmission. but it ought to find alternatives over the limitation and interference in the radio frequency (RF) band. For viable alternatives, visible light communication (VLC) technology comes to play as Light Fidelity (Li-Fi) which uses visible light as a channel for delivering very high-speed communication in a Wi-Fi way. In terms of availability, bandwidth, security and efficiency, Li-Fi is superior than Wi-Fi. In this paper, we present a Li-Fi-based indoor communication system. prototype model has been proposed for single user scenario using visible light portion of electromagnetic spectrum. This system has been designed for audio data communication in between the users in transmitter and receiver sections. LED and photoresistor have been used as optical source and receiver respectively. The electro-acoustic transducer provides the required conversion of electrical-optical signal in both ways. This system might overcome problems like radio-frequency bandwidth scarcity However, its major problem is that it only works when it is pointed directly at the target.

The expanding streaming culture of large amounts of data, as well as the requirement for faster and more reliable data transport systems, necessitates the development of innovative communication technologies such as Visible Light Communication (VLC). Nonetheless, incorporating VLC into next-generation networks is challenging due to technological restrictions such as air absorption, shadowing, and beam dispersion. One technique for addressing some of the challenges is to use the multiple input multiple output (MIMO) technique, which involves the simultaneous transmission of data from several sources, hence increasing data rate. In this work, the data transmission performance of the MIMO-VLC system is evaluated using a variety of factors such as distance from the source, data bit rate, and modulation method.

Over earlier years of huge technical developments, the need for a communication system has risen tremendously. Inrecent times, public realm interaction has been a popular area, hence the research group is emphasizing the necessity of quick and efficient broadband speeds, as well as upgraded security protocols. The main objective of this project work is to combine conventional Li-Fi and VLC techniques for video communication. VLC is helping to deliver fast data speeds, bandwidth efficiency, and a relatively secure channel of communication. Li-Fi is an inexpensive wireless communication (WC) system. Li-Fi can transmit information (text, audio, and video) to any electronic device via the LEDs that are positioned in the space to provide lighting. Li-Fi provides more advantages than Wi-Fi, such as security, high efficiency, speed, throughput, and low latency. The information can be transferred based on the flash property of the LED. Communication is accomplished by turning on and off LED lights at a faster pace than the human visual system can detect.

In the near future, the high data rate challenge would not be possible by using the radio frequency (RF) only. As the user will increase, the network traffic will increase proportionally. Visible light communication (VLC) is a good solution to support huge number of indoor users. VLC has high data rate over RF communication. The way internet users are increasing, we have to think over VLC technology. Not only the data rate is a concern but also its security, cost, and reliability have to be considered for a good communication network. Quantum technology makes a great impact on communication and computing in both areas. Quantum communication technology has the ability to support better channel capacity, higher security, and lower latency. This paper combines the quantum technology over the existing VLC and compares the performance between quantum visible light communication performance (QVLC) over the existing VLC system. Research findings clearly show that the performance of QVLC is better than the existing VLC system.

Visible light communication (VLC) is an important alternative and/or complementary technology for next generation indoor wireless broadband communication systems. In order to ensure data security for VLC in public areas, many studies in literature consider physical layer security (PLS). These studies generally neglect the reflections in the VLC channel and assume no inter symbol interference (ISI). However, increasing the data transmission rate causes ISI. In addition, even if the power of the reflections is small compared to the line of sight (LoS) components, it can affect the secrecy rate in a typical indoor VLC system. In this study, we investigate the effects of ISI and reflected channel components on secrecy rate in multiple-input single-output (MISO) VLC scenario utilized null-steering (NS) and artificial noise (AN) PLS techniques.

To achieve secure uplink communication from smartphones’ screen to a telephoto camera at a long distance of 3.5 meters, we demonstrate that low-luminance space division multiplexing screen is effective in enhancement of the physical layer security. First, a numerical model shows that the spatial inter-symbol interference caused by space division multiplexing prevents eavesdropping from a wide angle by the camera. Second, wide-angle characteristics of the symbol error rate and the pixel value distribution are measured to verify the numerical analysis. We experimentally evaluate the difference in the performances from a wide angle depending on the screen luminance and color. We also evaluate the performances at a long distance in front of the screen and a short distance from a wider angle.

Wrist-worn devices enable access to essential information and they are suitable for a wide range of applications, such as gesture and activity recognition. Wrist-worn devices require appropriate technologies when used in sensitive areas, overcoming vulnerabilities in regard to security and privacy. In this work, we propose an approach to recognize wrist rotation by utilizing Visible Light Communication (VLC) that is enabled by low-cost LEDs in an indoor environment. In this regard, we address the channel model of a VLC communicating wristband (VLCcw) in terms of the following factors. The directionality and the spectral composition of the light and the corresponding spectral sensitivity and the directional characteristics of the utilized photodiode (PD). We verify our VLCcw from the simulation environment by a small-scale experimental setup. Then, we analyze the system when white and RGBW LEDs are used. In addition, we optimized the VLCcw system by adding more receivers for the purpose of reducing the number of LEDs on VLCcw. Our results show that the proposed approach generates a feasible real-world simulation environment.

The Sixth Generation (6G) is currently under development and it is a planned successor of the Fifth Generation (5G). It is a new wireless communication technology expected to have a greater coverage area, significant fast and a higher data rate. The aim of this paper is to examine the literature on challenges and possible solutions of 6G's security, privacy and trust. It uses the systematic literature review technique by searching five research databases for search engines which are precise keywords like “6G,” “6G Wireless communication,” and “sixth generation”. The latter produced a total of 1856 papers, then the security, privacy and trust issues of the 6G wireless communication were extracted. Two security issues, the artificial intelligence and visible light communication, were apparent. In conclusion, there is a need for new paradigms that will provide a clear 6G security solutions.

Systems based on WB protection have a limited lifetime, measured in months and sometimes days. Unfortunately, to understand for how long the application will be uncompromised, if possible, only empirically. However, it is possible to make a preliminary assessment of the security of a particular implementation, depending on the methods and their number used in the implementation, it will allow reallocating resources to more effective means of protection.

With the rapid development of the Internet of Things and the exploration of its application scenarios, embedded devices are deployed in various environments to collect information and data. In such environments, the security of embedded devices cannot be guaranteed and are vulnerable to various attacks, even device capture attacks. When embedded devices are attacked, the attacker can obtain the information transmitted by the channel during the encryption process and the internal operation of the encryption. In this paper, we analyze various existing white-box schemes and show whether they are suitable for application in IoT. We propose an application of WBEAs for distributed devices in IoT scenarios and conduct experiments on several devices in IoT scenarios.

All along, white-box cryptography researchers focus on the design and implementation of certain primitives but less to the practice of the cipher working modes. For example, the Galois/Counter Mode (GCM) requires block ciphers to perform only the encrypting operations, which inevitably facing code-lifting attacks under the white-box security model. In this paper, a code-lifting resisted GCM (which is named WBGCM) is proposed to mitigate this security drawbacks in the white-box context. The basic idea is to combining external encodings with exclusive-or operations in GCM, and therefore two different schemes are designed with external encodings (WBGCM-EE) and maskings (WBGCM-Maksing), respectively. Furthermore, WBGCM is instantiated with Chow et al.'s white-box AES, and the experiments show that the processing speeds of WBGCM-EE and WBGCM-Masking achieves about 5 MBytes/Second with a marginal storage overhead.

With the widespread application of power Internet of Things (IoT), the edge IoT agents are often threatened by various attacks, among which the white-box attack is the most serious. The white-box implementation of the cryptography algorithm can hide key information even in the white-box attack context by means of obfuscation. However, under the specially designed attack, there is still a risk of the information being recovered within a certain time complexity. In this paper, by introducing pseudo states, a new white-box implementation of SM4 algorithm is proposed. The encryption and decryption processes are implemented in the form of matrices and lookup tables, which are obfuscated by scrambling encodings. The introduction of pseudo states could complicate the obfuscation, leading to the great improvement in the security. The number of pseudo states can be changed according to the requirements of security. Through several quantitative indicators, including diversity, ambiguity, the time complexity required to extract the key and the value space of the key and external encodings, it is proved that the security of the proposed implementation could been enhanced significantly, compared with the existing schemes under similar memory occupation.

Recent works have empirically shown that neural network interpretability is susceptible to malicious manipulations. However, existing attacks against Interpretable Deep Learning Systems (IDLSes) all focus on the white-box setting, which is obviously unpractical in real-world scenarios. In this paper, we make the first attempt to attack IDLSes in the decision-based black-box setting. We propose a new framework called Dual Black-box Adversarial Attack (DBAA) which can generate adversarial examples that are misclassified as the target class, yet have very similar interpretations to their benign cases. We conduct comprehensive experiments on different combinations of classifiers and interpreters to illustrate the effectiveness of DBAA. Empirical results show that in all the cases, DBAA achieves high attack success rates and Intersection over Union (IoU) scores.

Modern hardware systems are composed of a variety of third-party Intellectual Property (IP) cores to implement their overall functionality. Since hardware design is a globalized process involving various (untrusted) stakeholders, a secure management of the valuable IP between authors and users is inevitable to protect them from unauthorized access and modification. To this end, the widely adopted IEEE standard 1735-2014 was created to ensure confidentiality and integrity. In this paper, we outline structural weaknesses in IEEE 1735 that cannot be fixed with cryptographic solutions (given the contemporary hardware design process) and thus render the standard inherently insecure. We practically demonstrate the weaknesses by recovering the private keys of IEEE 1735 implementations from major Electronic Design Automation (EDA) tool vendors, namely Intel, Xilinx, Cadence, Siemens, Microsemi, and Lattice, while results on a seventh case study are withheld. As a consequence, we can decrypt, modify, and re-encrypt all allegedly protected IP cores designed for the respective tools, thus leading to an industry-wide break. As part of this analysis, we are the first to publicly disclose three RSA-based white-box schemes that are used in real-world products and present cryptanalytical attacks for all of them, finally resulting in key recovery.

The current adversarial attacks against machine learning models can be divided into white-box attacks and black-box attacks. Further the black-box can be subdivided into soft label and hard label black-box, but the latter has the deficiency of only returning the class with the highest prediction probability, which leads to the difficulty in gradient estimation. However, due to its wide application, it is of great research significance and application value to explore hard label blackbox attacks. This paper proposes an Automatic Selection Attacks Framework (ASAF) for hard label black-box models, which can be explained in two aspects based on the existing attack methods. Firstly, ASAF applies model equivalence to select substitute models automatically so as to generate adversarial examples and then completes black-box attacks based on their transferability. Secondly, specified feature selection and parallel attack method are proposed to shorten the attack time and improve the attack success rate. The experimental results show that ASAF can achieve more than 90% success rate of nontargeted attack on the common models of traditional dataset ResNet-101 (CIFAR10) and InceptionV4 (ImageNet). Meanwhile, compared with FGSM and other attack algorithms, the attack time is reduced by at least 89.7% and 87.8% respectively in two traditional datasets. Besides, it can achieve 90% success rate of attack on the online model, BaiduAI digital recognition. In conclusion, ASAF is the first automatic selection attacks framework for hard label blackbox models, in which specified feature selection and parallel attack methods speed up automatic attacks.